ICOM V-80 HT VHF TRANSCEIVER
ICOM V-80 HT VHF TRANCEIVER
Description
-
Rugged and Basic 2M with Powerful Audio!
Icom radios are built tough, and the IC-V80/E - Icom's most economical 2M - is no exception. This military rugged rig offers water resistance and superior protection against dust and dirt (IP54). Compact, rugged and with plenty of power, the IC-V80/E is ideal for basic, on-the-go ham operations.
750mW loud audio
The IC-V80/E uses the BTL (bridge-tied load) amplifier that doubles the audio output. The 36mm large speaker delivers 750mW of loud and intelligible audio*. Great for noisy environments.
* Typical value using with internal speaker.
Powerful 5.5W of output power
The IC-V80/E offers a just-right mix of power and size. 5.5 watts of high power will work to get your message through. Get up to 19 hours* of operating time with the Li-ion battery pack (BP-265) or 13 hours with the Ni-MH (BP-264). All that power comes is an easy to hold and use size - not too big, not too small.
* Typical operation. 5:5:90 duty cycle with power save on.
IP54 and MIL-STD-810 rugged construction
The dust protection and water-resistance equivalent to IP54 provides reliable operation for practical outdoor operation. The IC-V80/E tested to and passed 11 categories of MIL-STD-810 environmental tests.
A total of 207 memory channels
The IC-V80/E has a total of 207 memory channels, including 200 regular channels, 6 scan edges and 1 call channel. The channel name is programmable with 5 characters for easy recognition.
Built-in CTCSS/DTCS
The CTCSS and DTCS tone codes provide quiet stand-by and allow you to use tone-access repeaters. The pocket beep alerts you when a matching tone frequency is received. The tone scan detects the subaudible tone that is used for repeater access.
Internal VOX function
The IC-V80/E has internal VOX (Voice Operated Transmit) function for convenient handsfree operation with a compatible optional headset and plug adapter cable. Also, the VOX gain and VOX delay time are adjustable.
Other features
- WX channel and weather alert function (USA version only)
- Program, memory, skip, priority and tone scans
- Power save function
- BNC type antenna connector
- Automatic repeater function (USA version only)
- 1750Hz tone for European repeater access (IC-V80E only)
- TOT (time out timer) setting
- Repeater lockout and busy channel lockout
- PC programmable with optional CS-V80
- Transceiver-to-transceiver cloning (Optional)
- Direct keypad frequency entry
- DTMF autodial memories
- Auto power off
- LCD backlight
- Wide/narrow channel spacing
Specification
-
Frequency range USA Tx 144-148 MHz Rx 136-174 MHz *Guaranteed range 144-148MHz Europe 144-146 MHz Mode : F3E, F2D, [M] Number of memory ch. : 207 (6 scan edges, 1 call) Antenna connector : BNC (50 ohm) Power supply : 7.2 VDC Frequency stability : ±2.5 ppm -12°C to +60°C Current drain (at 7.2 V DC) Tx High (5.5 Watts) 1.4A Rx Max. Audio 310mA Standby 65mA Power save 20mA Usable temp. range : -12°C to +60°C; -4°F to +140°F Dimensions : 58(W) × 112(H) × 30(D) mm (projections not included) 21⁄8(W) × 515⁄32(H) × 17⁄16(D)in. Weight : 360g; 12.7oz (with BP-264) TRANSMITTER Output power (at 7.2 V DC) High 5.5W Mid 2.5W Low 0.5W Spurious emissions : Less than -60 dB Max. freq. deviation : ± 5 kHz/ ± 2.5 kHz (Wide/Narrow) Ext. MIC connector : 3-conductor 2.5(d) mm (1⁄10″)/2.2k ohm RECEIVER Receive system : Double-conversion super heterodyne Intermediate frequencies : 1st 21.7 MHz 2nd 450 kHz Sensitivity (at 12dB SINAD) : 0.14 µV typical Squelch sensitivity (at threshold) : 0.1µV typical Selectivity : 70/50dB (Wide/Narrow) typical Inter modulation : 70/65dB (Wide/Narrow) typical Spurious and Image rejection : 75dB typical Audio output power : 750 mW typ. with an 16 ohm load Ext SP connector : 3-conductor 3.5 (d) mm (1/8")/8 ohm In The Box
-
- Unit Icom IC-V80
- Battery
- Ac adaptor
- Battery charger
- Antenna
- Beltclip
- Dust protections
- Manual book