ALINCO DJ-496 HT UHF TRANSCEIVER
ALINCO DJ-496 HT UHF TRANCEIVER
With shipment TIKI for Rp 0
Rp 1.450.000
Description
Description
-
Alinco has created a new UHF FM Hand held Transceiver that sets new standards in features, convenience and easy operation. The DJ-496T sports an alphanumeric display for easy memory management. It has an ergonomic design that's "user friendly" and the 4 watt output battery is standard. You'll be ready to travel the world with CTCSS encode+decode, DCS and European tone bursts, all included at no extra cost. Best of all, the DJ-496T retains the proud Alinco tradition of quality construction and excellent value.
- Alphanumeric display
- 40 memory channels + Call Channel
- Backlit Keypad
- 4 watt output with standard battery
- CTCSS encode+decode and DCS
- 13.8 VDC direct input with battery charge feature
- Direct frequency input
- S-meter
- Autodialer
- Cable Cloning
- Computer programmable (third party software required)
- MARS/CAP capability
- Additional features, including theft alarm!
Specification
-
Freq. RX original status 430 to 449.995 MHz Freq. Stability +/-5 ppm Antenna Imp. 50 ohm unbalanced Supply Voltage DC 13.8V rated DC 7.0min to 16V max Ground Negative GND Current consumption TX 5W 1.4A approx. at 13.8V external source RX 200mA approx/280mW RX squelched 50mA approx. RX Batt.Save on 20mA approx. Operating Temp. range -10 to +60 degrees C. Dimention w/o projection 56(W) x 124(H) x 40 (D) Weight with EBP-48N Approx. 375g (13.2oz) Transmitter Output power 5W 13.8V or 4W EBP-48N Low=0.8W Modulation Variable reactance FM Max. Deviation +/- 5kHz Spurious emission less than -60db Microphone Imp. 2k ohms approx. Receiver Circuit Double superheterodyne 1st IF freq. 45.1Mhz 2nd IF freq. 455khz Sensitivity 12db SINAD better than -12dBu (0.25uV or less) Selectivity more than -6dB/12kHz less than -60dB/26kHz Audio output power 280mW Audio impedance 8 ohms In The Box
-
- Unit
- Charger
- Desktop
- Antenna
- Clip, belt
- Manual book
Reviews
There are yet no reviews for this product.