WINRADIO WR-G303E RX EXTERNAL 9KHZ
WINRADIO WR-G303E RX EXTERNAL 9KHZ
With shipment TIKI for Rp 0
Rp 7.250.000
Description
Description
-
The WiNRADiO WR-G303e is a software-defined PC-based HF receiver (9 kHz to 30 MHz). It represents an external version of the award-winning WR-G303i receiver, with equivalent performance. The PC-based receiver is USB-controlled and compatible with modern desktop and laptop computers with USB interface. An optional serial interface is also available.
Features
- Extraordinary sensitivity
- Excellent strong signal handling
- Real-time spectrum analyzer
- Spot-on tuning in 1Hz steps
- Accurate signal strength indicator
- Very low phase noise
- DRM decoder option
- Serial interface option
With the Professional Demodulator Option, the many additional features include:
- Continuously variable IF bandwidth 1Hz - 15kHz
- User adjustable filter selectivity
- Built-in test and measurement instrumentation
- Interactive block diagrams
Specification
-
Receiver type DDS-based dual-conversion superheterodyne with software-defined last IF stage and demodulator Frequency range 9 kHz - 30 MHz Tuning resolution 1 Hz Mode (See Note 1.) AM, AMN, AMS, LSB, USB, CW, FM3, FM6, FMN Image/Spurious Rejection 60 dB typ. IP3 +5 dBm @ 20kHz MDS -135 dBm Spurious-free Dynamic Range 93 dB Phase noise -148 dBc/Hz @ 100 kHz RSSI accuracy 5 dB RSSI sensitivity 1 µV Selectivity AM 6 kHz AMN 4 kHz AMS 4 kHz LSB, USB 2.5 kHz (-6dB) (See Note 2.) CW 500 Hz FM3 3 kHz FM6 6 kHz FMN 12 kHz Scanning speed 40 channels/s Sensitivity Mode 0.009-0.1 MHz 0.1-2 MHz 2-30 MHz (AM/SSB/CW 10dB S/N) AM 9.0µV 2.2µV 0.9µV LSB, USB 3.0µV 0.7µV 0.3µV (FM 12dB SINAD)(See Note 3.) CW 1.2µV 0.2µV 0.1µV FM3, FM6, FMN 2.2µV 0.4µV 0.2µV Intermediate frequencies IF1: 45 MHz IF2: 12 kHz Roofing filter 2 x 4-pole 15 kHz crystal filter Frequency stability 10 ppm (0 to 60° C) Antenna input 50 ohm (SMA connector) Output 12 kHz IF2 output Interface USB (1.0 and 2.0 compatible) (serial interface optional) Dimensions Length: 164 mm (6.46") Width: 96 mm (3.78") Height: 41 mm (1.61") Weight 467 g (16.40 oz) Note: 1. The Professional Demodulator offers two additional demodulation modes, DSB and ISB. 2. The Professional Demodulator offers continuously adjustable IF bandwidth from 1 to 15000 Hz. 3. The AM sensitivity is specified at 30% modulation for 10 dB S/N ratio. For 80% modulation, typical AM sensitivity of WR-G303e is 0.3 µV in 2-30 MHz range. The Professional Demodulator improves sensitivity further by making it possible to extend filter lengths, and adjust the IF bandwidth for optimum reception of the received signal: This results in a typical improvement by 2-3 dB on AM/SSB/FM and up to 10 dB on CW. In The Box
-
- WR-G303e receiver
- Application software
- Comprehensive user's manual
- Low-noise linear power supply
- Start-up antenna
- USB cable
- BNC-to-SMA adapter
Reviews
There are yet no reviews for this product.