MOONRAKER FD2-30 HF FOLDED
Description
-
The HF FD 2-30 1kW PEP antenna system is easily erected in either a horizontal configuration between two towers or masts (not supplied) or in the space saving inverted v configuration from a single tower or mast, with a horizontal support stand-off, gibbet, at the top. The antenna is rated at 1kWPEP or 250W CW. The radiating elements are of heavy duty stainless steel wire rope for strength and long life, even in corrosive atmospheres. The fittings and connections are of stainless steel with high quality insulators. Spreaders are of heavy duty UV stabilised material. Internal antenna components are completely encapsulated or enclosed for protection from the environment. The system provides efficient communications over the MF/HF range from 2.0 to 30 MHz with low (typically <2.0:1) SWR as measured at the input to 30m coaxial feeder.
Spesification
-
Frequency Range 2-30 MHz full version; 3-30 MHz compact version Impedance 50 ? (nominal) VSWR Typically Power Capability 1kW PEP, 200W CW (continuous) Connection Via coaxial cable (not supplied) to N Type socket on balun box Antenna Lengths Radiator: 50m (167ft) full version or 30m (98ft) compact version Recommended Mast/tower: 50m full version 12-15m (40-50ft); 30m compact version 9-12m Mast/Tower Height (30-40ft); 9m (30ft) minimum; two required for horizontal configuration. Horizontal support gibbet (for inverted V) 800mm (2.6ft) out from top of mast. Mast/Tower Spacing Horizontal: 50m/15m Mast 52m (170 ft) minimum; 30m/12m Mast 32, (105ft); Inverted V: 50m/15m Mast 44m (144ft); 30m/12m Mast 22m (72ft) Gain (peak) Better than 5dBi Wind Rating 240 km/h (150 mph), higher ratings available Packed Weight 14 kg (30.8 lbs), cubic weight 10kg (22 lbs) Packed Size 1 x 167 x 21 x 17 cm (65.8 x 8.3 x 2.5 ins) 1 x 50 x 25 x 10 cm (19.7 x 9.8 x 3.9 ins) In The Box
-